Les tuyaux en acier sont produits aux États-Unis depuis le début des années 1800. Un tuyau est une section creuse à section ronde, principalement conçue pour le transport de produits tels que des fluides, des gaz, des pellets, des poudres, etc. Mais les tuyaux en acier sont utilisés de diverses manières. Ils sont utilisés sous terre pour transporter l’eau et le gaz dans les villes et villages. Ils sont également spécifiés dans la construction pour protéger les fils électriques. Les tuyaux en acier peuvent être solides, mais légers. Cela les rend parfaits pour les cadres de vélo. Ils sont également utilisés dans la fabrication de pièces pour automobiles, d’unités de réfrigération, de systèmes de chauffage et de plomberie, de mâts de drapeau et de lampadaires, pour n’en nommer que quelques-uns.
The most important dimension for a pipe is the outer diameter (OD) together with the wall thickness (WT). OD minus 2 times WT (schedule) determines the inside diameter (ID) of a pipe, which determines the liquid capacity of the pipe. In our industry, when we talk about pipe, we tend to call out an (ID) and schedule, like 2 inch schedule 40, or 14 inch extra heavy. Examples of walls or schedules are Sch. 40, Sch. 80, Sch. Standard (STD), Sch. XS/XH, and Sch. XXS. Most pipe is sold in 21 or 42 foot lengths.
Le mot tube fait référence à rond, carré, rectangulaireet les sections creuses ovales utilisées pour les équipements sous pression, pour les applications mécaniques et pour les systèmes d'instrumentation.
Steel tubing can be made from various raw materials, like iron, carbon, manganese, vanadium, and zirconium. Like pipe, tubing can be produced as either seamless or welded. Seamless tubing is a solid block of steel that is rolled into a round shape and then pierced and stretched into its final length. Think of having a wad of play dough and rolling it into a cylinder. Then push your finger through the middle and make it longer with the extra dough. That’s how it’s produced, but it’s hot and spinning and completely done with machines. Welded steel tubing, on the other hand, is made from the coil. The coil is slit and then rolled up into a round shape and the ends are welded together. From there, the tubing can simply be cut to a certain length as round tubing, or it can be further deformed into other shapes, such as square, rectangular, oval, etc.
Tubes are indicated with outer diameter (OD) and wall thickness (WT), in inches or in millimeters. In our industry, buyers often refer to the item they want as an (OD) and a wall thickness (WT). Examples of wall thicknesses are 11 gauge, 1/4”, 3/8” and 5/8”. Tubing is sold in 20, 24, 40 and 48 foot lengths, but can be easily produced in custom lengths.